Presair vacuum switches make electrical contact when a certain set vacuum has been reached on its input.
By providing on/off switching from a pneumatic source, Presair vacuum switches deliver critical benefits:
- Safe and Convenient: Remote operation with complete electrical isolation. UL Recognized.
- Economical: Costs less than conventional controls
- Accurate: Highly stable with good repeat accuracy. All switches are 100% tested at high and low settings and at proof vacuum.
- Reliable: Minimal moisture absorption and maximal dimensional stability.
To learn more about Presair’s vacuum switching solutions visit our online store, or contact us!
Tinytrol vacuum switches provide versatile and convenient sensing. Their miniature size and variety of connection styles for simple implementation into any system. These switches allow for simple electrical on/off control over vacuum. As negative pressure rises or falls, one contact opens as the other closes. This provides a perfect solution for monitoring, controlling, and notifying. Vacuum switch is factory set. Adaptor available to enable Tinytrol® retrofit for certain competitors’ models with small diameter mounting thread.
Rating: 1 AMP to 25 AMPS. Horsepower rating to 1 HP @ 120 VAC; 2 HP @ 240 VAC
Materials: Acetal body; diaphragms available in various materials: nitrile, silicon, neoprene, EPDM, etc.
Click below to view more vacuum switch product details.
Field adjustable vacuum switch. Dual vacuum switches available, factory set to allow each microswitch to operate at a different water vacuum setting. Range is 10% to 25% lower on reducing vacuum. Special differentials available.
Rating: 3A, 5A, 10A, 21A @ 250 VAC. Also available to 25 AMPS.
Materials: Acetal body and mechanism; diaphragm available in various materials: nitrile, neoprene, vitron, EPDM and silicon rubber; stainless or zinc plated steel screws; stainless steel springs.
Click below to view more adjustable vacuum switch product details.
Miniature single pole and double pole switches used as vacuum switches where moderate accuracy is sufficient. Vacuum ranges: 6 IN.W.G. to 200 W.G. Vacuum setting marked on switch in inches water gauge. Actuation point is customer specified and set at the Presair factory. Some models allow field adjustment.
Rating: 1 AMP resistive @ 250 VAC. Ratings are dependent on actuation pressure and must be de-rated at lower pressures. UL recognized for 100,000 operations.
Materials: Rynite/acetal body, silicon diaphragm, gold pins and contacts, stainless steel springs and screws.
Click below to view more PCB vacuum switch product details.
Presair’s sensitive single pole switches can be adapted to vacuum switches (from .25 IN.W.G. to 45 IN.W.G.) or as differential pressure switches.
These “slow make, slow break” switches can respond to rapid pulsing and the gold plated silver contacts will handle low level switching currents. Optional adjustable air bleeds can be supplied on either side of the diaphragm for pulse-sensing application safe edges or bellows.
Rating: 750 ma @ 250 VAC to 5 ma @ 3 VDC; 1 AMP @ 250 VAC to 5 ma @ 3 VDC. UL Recognized for 100,000 operations.
Materials: Acetal body; EPDM diaphragm bonded to steel ring; other diaphragm materials are available; gold plated silver contacts; silver plated bronze springs; silver plated copper or brass terminals.
Click below to view more sensitive vacuum switch product details.